Home / Safety and sheet vinyl
Slip-resistant safety vinyl for wet areas, hygienic sheet vinyl for kitchens, aged care and amenities, and luxury vinyl tile for offices and apartments, installed with coved edges and heat-welded seams where the area demands it.
Bathrooms, kitchens, salons, aged care rooms and amenities need floors that are safe underfoot, easy to clean and watertight at the seams. That comes down to the product being right for the area and the installation being done properly: a sound substrate, welded seams and coved edges with no gaps for water or dirt.
We install whatever quality vinyl is specified, from slip-resistant safety vinyl and sheet vinyl to luxury vinyl tile and plank, including diagonal and bordered LVT layouts in front-of-house spaces.
In wet areas, we prepare screeds to falls so water runs to the floor waste, then install the vinyl over a smooth, sound substrate. Every resilient floor starts with moisture testing and floor preparation.
Vinyl shows everything underneath it, so the substrate gets as much attention as the finish.
Product, slip rating, coving and seam details confirmed against the finishes schedule.
Slab moisture tested, screeds laid to falls in wet areas, and the floor smoothed so nothing shows through.
Seam positions, patterns and borders planned so joins sit where they should.
Vinyl adhered, coved where specified, and seams heat-welded for a watertight, hygienic finish.
Floors protected through to handover, with care and maintenance information.
From training kitchens and salons to aged care rooms and retirement apartments.
Completed
Robina, Gold Coast
A multi-level fitout of TAFE Queensland’s newest campus, recognised as Australia’s first sustainable vocational education and training campus. Commercial training kitchens, hair and beauty studios, lecture rooms, a gym, classrooms, and a conference and bar level for events.
Image: Shape Australia
In delivery
Manly, Brisbane
Retirement apartments on the heritage Lota House site, built alongside an operating aged care community.
Image: FKG Group
South East Queensland and Tweed Heads
Staged refurbishments and room-by-room changeovers across six aged care homes, with residents in place.
Sheet vinyl comes in wide rolls and can be heat-welded and coved into one continuous, watertight surface, which suits wet areas, kitchens and aged care. Luxury vinyl tile and plank (LVT) is laid as individual pieces and is used where a timber or stone look matters, such as offices, apartments and front-of-house spaces.
It depends on the area and how it’s used, and it’s set by the project’s specification. Safety vinyls are tested and classified for slip resistance under Australian Standard AS 4586, and we install the product with the rating specified for each area.
Coving takes the vinyl up the wall in a smooth curve instead of a sharp corner, with the seams heat-welded. It removes the gap where dirt and water collect, which is why it’s used in aged care, healthcare, kitchens and amenities.
Yes. We lay screeds to falls in wet areas so water drains to the floor waste, then install the vinyl over the finished screed.
Send the drawings, finishes schedule and program to our estimating team. We’ll come back with an itemised price and any clarifications.
